Page 158

Hytek Catalogue Retail 2013-14

Heating Oil & Fuel Tank Equipment Qual-Oil Pipe & Fittings - Qual-Oil pipe is a thermoplastic pipe made from PEX material which makes it flexible & easy to install. - No need to oversize your oil line as it’s available in 10mm, 15mm, 22mm & 28mm OD. - Advantages over the traditionally used copper pipe: It’s impervious to concrete. 50m & 100m coils means no buried joints. - Approved by OFTEC (OFCERT Licence No. 2064099901). - Resistant to freeze bursting, pipe is tested & rated down to -30 C. - 25 year manufacturer’s guarantee subject to maximum service conditions of:- 10 bar @ 20 C, 5 bar @ 50 C. - Use only with BS 864 & EN1254.2 metric compression fittings with metric size inserts. (For end fittings see page 159). - Do not use Qual-Oil pipe within a building. - Do not use Qual-Oil on the boiler side of the fire valve. - Do not use Qual-Oil within 0.5m of the oil burner/boiler. - Do not use Qual-Oil above ground. - Do not expose to radiant heat above 50 C. Allow for approx 1% expansion on the length of pipe in service. - Follow buried work installation code of practice for oil firing (BS5410:Part1:1997 section 8.2.4). H For end fittings see page 159 QP10.IN QP28.IN QP15.IN QP22.IN Stk Code Description List QP10.50 10mm pipe (50m coil) 55.86 QP10.100 10mm pipe (100m coil) 111.74 QP15.50 15mm pipe (50m coil) 70.28 QP15.100 15mm pipe (100m coil) 140.58 QP22.50 22mm pipe (50m coil) 132.40 QP22.100 22mm pipe (100m coil) 264.94 QP28.50 28mm pipe (50m coil) 202.19 QP28.100 28mm pipe (100m coil) 404.35 QP10.IN 10mm copper insert (10 bag) 6.15 QP15.IN 15mm copper insert (10 bag) 6.46 QP22.IN 22mm copper insert (10 bag) 6.77 QP28.IN 28mm copper insert (10 bag) 6.77 Copyright HYTEK 158 (GB) LIMITED 2013


Hytek Catalogue Retail 2013-14
To see the actual publication please follow the link above